New Laptop Hard Disk
I am writing this entry from my newly upgraded PowerBook with a 7200rpm 100GB hard disk. I have pictures to prove the tale — I’ll post them later. The PowerBook works like a charm. I love it so far. The computer certainly boots faster than ever and launches multiple applications simultaneously faster than ever. I haven’t put the PB through its paces yet, though.
Anyway, I want to thank the team at PB FixIt — they did a great job with their walk through. Their instructions were dead-on for disassembling my laptop.
I would add just three small items to those who may follow in my footsteps. The first item sounds pretty brain-dead, but is easy enough to forget as a PowerBook owner: shutdown the laptop before starting. This is worth mentioning because as a Mac user I’ve grown so comfortable with the Sleep mode that I think “sleep = off”. The other thing I would note is on page 6: the orange cables are disconnected from the motherboard by pulling straight up. I didn’t enjoy having to guess at something like that with a very expensive motherboard at stake. Finally, the guide needs to mention that when you’re attaching the upper case (keyboard, trackpad, et al) you want to make sure the trackpad ribbon (from page 3) is properly positioned through its slot or you won’t be able to reach it when it’s time to plug it back in.
And you need to plug in the “trackpad ribbon”. It turns out that the “trackpad ribbon” isn’t just for the trackpad. It’s for everything on the upper case that needs to talk with the motherboard: keyboard, trackpad, and power button. I happened to have missed this step and my PowerBook was a brick when I was done assembling it. A brick. A paperweight. It didn’t work. It didn’t start. It didn’t do anything. I pressed the power button and… nothing. Not a whir, a light, nor a chirp. Absolute nothing. It is a very eerie sensation, followed by a little bit of panic. I did figure out pretty quickly that I’d skipped a step in my rush to enjoy my new system, and then discovered that I had to go all the way back to pulling off the upper case to fix my oversight. I hope I’ve saved you that trouble. Now you know what to look for first if your PowerBook won’t start after a hard drive replacement or upgrade.
I dropped the old 80GB disk into a MacAlly 2.5″ Firewire enclosure. The enclosure really impresses me. I also own standard size enclosure from MacAlly and I think very highly of both products. The 2.5″ is a really solid piece of work. I read some reviews that bad-mouthed it because it doesn’t come with a DC power adapter, which is needed when running from USB. However, the drive does come with a second USB cable that plugs into the DC power port, so you just need to plug that into a powered USB port to pull the necessary power to run the drive. (Since USB sucks, it doesn’t bother to provide enough power on its own.) Of course, if you simply use the Firewire connector, all the necessary power is pulled from that and you don’t need to fool with any of this USB nonsense.
I booted from a different Firewire drive that had an old image of my main disk, then used SuperDuper! to clone the old 80GB drive onto the new 100GB drive and rebooted. (I’m aware of CCC, but I find SuperDuper! sufficiently superior to CCC that I’m willing to pay for the utility.)
